FREE EMV HARDWARE UPGRADE
FOR ALL PUMPS
FOR Station Owners
Get EMV upgraded and enabled! Equipment is free! No Capital Expenditure, depletion of your capital or liquidity concerns when you upgrade with the Sound Easy Pump.
Fast. Simple. Secure. Free Retrofit EMV Solution.
Let’s Crunch the Numbers
on Your EMV Upgrade with Sound Easy Pump!
- IM20 for each Fueling Point
- A80 Bridge to connect processor
- EMV Retrofit Pump Kit
- Device Deployment (with Boarding)
- Dedicated Installation Technician
- $75/additional fueling point
- Low downtime (approx. 3 hours)
- Seamless Integration to Existing Pumps
SubscriptionPer Fueling Point
- 24/7 Technical Support
- Automatic Software Upgrades
- EMV & PCI Compliance
- Reduced Rate after 36 months
- Wifi Kit per Station = $470
- Printer per Pump = $500
- Training if needed = $135
- Professional Service = $FREE
*Equipment breakage insurance is additional $20.00 per month per station and $175.00 deductible. After the required 3-year commitment, stations own EMV Upgrade hardware. Cannot be combined with other Sound Payments offers other than the $1000 referral revenue bonus. Promotion expires June 30, 2022.
Let Us Help You Meet
EMV Requirements at the Pump
Struggling with the high cost of upgrading fuel dispensers to accept EMV cards? Sound Easy Pump™ is a unique retrofit payment solution for the petroleum industry that is cost-effective, PCI compliant, and accepts EMV, Mag-Stripe, and Contactless payment transactions directly at the pump. Independent stations can now meet industry requirements without the need to purchase new pumps and close stations for installation. The platform is also flexible to support future innovations.
EMV Upgrade Guide
Sound Easy Pump™ Installation – Gilbarco Pumps
Here we present an example of an EMV upgrade at the “Mega Saver” 16-point fueling station in Omaha, NE. We upgraded their Gilbarco pumps with the Sound Easy Pump™.
Remove the old card reader and pin pad.
Precut inserts are used to fill in the spaces left by the old card reader and pin pad. The existing bracket and nuts/bolts/screws are used.
Mount in the Sound Easy Pump™/IM20 bracket where the original pin pad was.
IM20 preconfigured to the site is mounted to the bracket and power cable attached and plugged in. Plug in the preconfigured IM20. Boarding for the site has been done prior to install and any changes can be performed remotely. On screen Verify WiFi connectivity is established for communication to the indoor bridge.
Close up the pump, power on, and test a fueling transaction.